Built into the bones of the house.
Low-voltage rough-in and structured media for custom home builders, tract and production builders, and homeowners pre-wiring during a remodel or new build. One trade, on your schedule, documented.
A low-voltage partner for the trades who run the build.
For custom builders
A turnkey low-voltage partner who shows up at rough-in, finishes on schedule, and hands you a closing packet.
- Plan markup before framing
- RFI responses inside 24 hours
- AS-BUILTS for the homeowner binder
For tract & production builders
Consistent specs across every plan, predictable costs, and one point of contact for the whole community.
- Standard package per plan type
- Volume pricing, fixed per-unit
- Coordination with your GC schedule
For homeowners
Pre-wiring a remodel or new build? One number to call for a future-proof spec done right the first time.
- Walk-through with the architect or GC
- Labeled drops, tested and documented
- Optional handoff to HiveHome integration
Whether new construction or remodel.
We can help you with all your structured wiring and installs. Planning and prewiring during construction is essential in saving time and money on your project.
We can run all of the following cables you need:
Cat6a structured cabling
23 AWG, plenum-rated where required. Drops to every room. 10GbE to 100m, PoE++ 90W ready.
Coax (RG6 quad-shield)
Where it still matters — security panel cellular, satellite, and OTA antenna drops at the attic.
Speaker pre-wire
16 or 14 AWG, home-run to the rack location. Ceiling, in-wall, and exterior zones — tested for shorts and labeled.
Camera & doorbell drops
PoE-ready Cat6a to every camera location and entry door. Stubs at eaves and corners you might add later.
Structured media enclosure
Leviton or Channel Vision can, sized for the home. Patch panel, PoE switch, and a labeled schedule taped to the door.
Conduit / smurf tube
From the rack to spots you can’t predict — theater wall, primary office, garage. For the standard that comes next.
Real installs. Honest documentation.
Every drop labeled, every run photographed, every closet diagrammed. You get the install AND the documentation.
The cheapest time is before the drywall.
Cable pulled at rough-in costs a fraction of a retrofit, and the spec stays current for decades — Cat6a carries 10GbE to 100 m and PoE++ at 90 W today. Pre-wiring also avoids the “WiFi everything” trap most homes outgrow inside five years.
- Cheaper once, behind drywall. No drywall patching, no fishing walls later.
- Future-proof to current standards. Cat6a → 10GbE, PoE++ 90 W for APs, cameras, panels.
- Wired beats wireless where it counts. APs, cameras, TVs, panels — all happier on copper.
Plan. Rough-in. Trim-out.
Plan review
We mark up the architectural drawings, spec every drop, and walk it with the GC before framing closes in.
Rough-in
Pulled clean, supported per code, away from line voltage. Every drop labeled and photographed at the box.
Trim-out
Terminate, test to certification, document. Hand off to the owner — or to HiveHome for integration.
Building, selling plans, or remodeling? Let’s pre-wire.
The earlier we walk the plans, the cleaner the install.
Get a Pre-Wire Quote